Cisco Cisco Wireless Control System Version 4.0
19
Release Notes for Cisco Wireless Control System 4.2.62.0 for Windows or Linux
OL-14853-01
Caveats
•
CSCsj32075—The solid database server may run out of memory and stop if several hundred
controllers are running several thousand access points.
controllers are running several thousand access points.
•
CSCsj33491—The guest user template needs a disclaimer that the message cannot exceed 255
characters.
characters.
•
CSCsj34936—If a non-default port is chosen, WCS does not install properly.
•
CSCsj37671—If the wrong antenna elevation is provided, a heatmap is not created.
•
CSCsj39020—The AP Group VLAN cannot be removed from the AP Template page.
•
CSCsj43197—The variables as part of the rogue error message are not displayed.
•
CSCsj43228—If you upgrade from 4.0 to 4.1, WCS shows 2106 as the network module controller.
•
CSCsj43332—The rogue list values differ on WCS and WLC.
•
CSCsj47265—When you choose Monitor > Security, the Security Summary page displays. Under
the AP Threats and Attacks heading, you can click one of the alarms to see how many are active. If
you click the link to the active one(s), you see the alarm page but no alarms appear. The alarms
appear incorrectly for signature attacks, client security related attacks, and access point threats and
attacks.
the AP Threats and Attacks heading, you can click one of the alarms to see how many are active. If
you click the link to the active one(s), you see the alarm page but no alarms appear. The alarms
appear incorrectly for signature attacks, client security related attacks, and access point threats and
attacks.
•
CSCsj47754—In a Linux environment, a WLA script error occurs when trying to pull up maps.
•
CSCsj60008—A search of access points by floor area shows the wrong results.
•
CSCsj62403—A Javascript error occurs during scheduling of a guest user.
•
CSCsj64392—On the Web Auth Template page, the verification for the maximum size of the
message is not done.
message is not done.
•
CSCsj64785—The access point alarms are not clearing after a hibernation.
•
CSCsj66354—You cannot add WLC to WCS using SNMPv3 Privacy Protocol set to None.
•
CSCsj66950—bitlist_count needs to be replaced with bitlist_anybit_set( ).
•
CSCsj66992—The alarm summary does not show the major rogue access point alarm count when
the severity is changed from minor to major.
the severity is changed from minor to major.
•
CSCsj68444—An import asset into the location server fails.
•
CSCsj72570—The client access point association history table does not work.
•
CSCsj73965—If WCS has a WLAN ACL configured in the template, it will not push the ACL to the
controller running 4.0.
controller running 4.0.
•
CSCsj76540—The WCS floors need a default value for the RF calibration model.
•
CSCsj79103—When an installation on a 64-bit operating system is attempted, the installer should
abort.
abort.
•
CSCsj80544—WCS should not allow chokepoints with duplicate MAC addresses.
•
CSCsj92176—The client count on the building map displays incorrectly.
•
CSCsj98722—You cannot add MAC filters using MAC filtering on the WEB GUI.
•
CSCsk08823—The MAC filtering template corrupts the WLAN profile ID on WLC.
•
CSCsk09265—If an invalid MAC address is entered in client troubleshooting, the message in the
pop-up window is misleading.
pop-up window is misleading.
•
CSCsk15926—WCS users without superuser or root permissions cannot search access points by
floor area or outdoor area.
floor area or outdoor area.