Cisco Cisco Unified MeetingPlace 7.0 Guia De Configuração Rápida
Administration Center Page References for Cisco Unified MeetingPlace
Usage Configuration Page
84
Bill initiator
Who gets billed for each reservationless meeting:
•
Yes—Bill the user who starts the meeting.
•
No—Bill the meeting owner.
Restriction: This field is always set to No when the
Allow any profiled user to initiate
field is set to No.
Default: Yes
TUI menu is reservationless only
Whether users can schedule meetings or only start reservationless meetings from the
TUI
TUI
6
.
Default: No
Owner can press 2 in TUI to
initiate
initiate
Whether meeting owners can initiate reservationless meetings more quickly by skipping
the
the
Profile number
entry.
•
Yes—Meeting owner can start a reservationless meeting from the TUI waiting room
by pressing 2 and entering the
by pressing 2 and entering the
Profile password
.
•
No—Meeting owner starts the reservationless meeting from the TUI waiting room
by pressing 3 and entering both the
by pressing 3 and entering both the
Profile number
and
Profile password
.
If the
Allow any profiled user to initiate
field is set to Yes, then any profiled user may
press 3 to start the reservationless meeting with both the
Profile number
and
Profile
password
.
Default: No
Alarms
Call capacity MINOR alarm (in
percentage)
percentage)
Call capacity MAJOR alarm (in
percentage)
percentage)
Specify the percentage of call capacity that triggers a minor and major alarm.
You can configure minor alarms to be triggered when call capacity is 30–100 percent.
You can configure major alarms to be triggered when call capacity is 91–100 percent. The
call capacity percentage for a major alarm must be greater than the percentage for a minor
alarm.
You can configure major alarms to be triggered when call capacity is 91–100 percent. The
call capacity percentage for a major alarm must be greater than the percentage for a minor
alarm.
Call out on major alarm
Phone number to call on alarm
Whether the system places a call to the specified phone number
1
if an error condition
affects system operation.
Recommendation: Yes
Restriction: The + character is allowed only as the first character in the field.
Default: No
Outdial Meetings
Number of retry attempts
Number of times the system tries to call each person, when dial out is enabled for a
meeting. This setting also determines the number of times the system goes through the
meeting. This setting also determines the number of times the system goes through the
sequence for each user.
Default: 2
Delay between retries (sec)
Number of seconds between dial-out retries. This setting also determines the number of
seconds between each set of
seconds between each set of
Restriction: The actual time between dial-out attempts may be longer due to network
delays.
delays.
Default: 300
Table 55
Field Reference: Usage Configuration Page (continued)
Field
Description