Cisco Cisco Prisma II EDR Receiver Guia Da Instalação
Chapter 3 Operation using ICIM
82
To Enter the User Password
To use the user password feature, you must create and enter a password of exactly
eight digits using only the 0-9 number keys.
eight digits using only the 0-9 number keys.
The password remains active for 10 minutes after your last keystroke. To change
configuration parameters after 10 minutes, you must re-enter your password.
configuration parameters after 10 minutes, you must re-enter your password.
Complete the following steps to enter a user password.
1 Access the Password menu as shown in To Access the Password Menu (on page
1 Access the Password menu as shown in To Access the Password Menu (on page
2 Press the
key. The user password menu appears.
3 When User Psw/Shift Off appears, press the
key to display Shift On, and
then enter the eight digits of your password, using the 0-9 number keys.
To change a digit you have just typed, use the CAN (Cancel) function by
pressing the
key. This deletes the last digit typed.
4 Press the
key to enter the password. The ICIM2 or ICIM2-XD display
updates to show whether your password entry was accepted.
If the password is accepted, the word Accepted appears in the menu, and
you are able to return to the MAIN menu.
you are able to return to the MAIN menu.
If the password was rejected, the word Rejected appears in the menu.
Reasons for a password to be rejected include:
–
Reasons for a password to be rejected include:
–
Entering more than eight digits for the password.
–
Pressing keys other than the 0-9 number keys.
–
Entering an incorrect password if a valid password has been entered.
If the password is rejected, press the
key to return to the password
menu and re-enter the password as described in step 3 above.