Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
Configuration
Configuring the System to Perform as an Emergency-CSCF ▀
Cisco ASR 5000 Series Session Control Manager Administration Guide ▄
OL-22952-01
Configuring the System to Perform as an Emergency-CSCF
This section provides a high-level series of steps and the associated configuration file examples for configuring the
system to perform as an Emergency-CSCF in a test environment. For a more robust configuration example, refer to the
Sample Configuration Filesappendix.
system to perform as an Emergency-CSCF in a test environment. For a more robust configuration example, refer to the
Sample Configuration Filesappendix.
To configure the system to perform as an Emergency-CSCF:
Step 1
Set system configuration parameters such as activating PSCs by applying the example configurations found in the
System Administration Guide.
System Administration Guide.
Step 2
Configure the system to perform as a Proxy-CSCF and set basic CSCF parameters by applying the example
configurations presented in the
configurations presented in the
Step 3
Set the system’s role as an Emergency-CSCF and configure service settings by applying the example configuration in
the section.
the section.
Step 4
Optional: Configure the system to perform as a Serving-CSCF and set basic CSCF parameters by applying the example
configurations presented in the
configurations presented in the
Step 5
Log system activity by applying the example configuration found in the
Step 6
Save the configuration by following the steps found in the
Setting the System’s Role as an Emergency-CSCF and Configuring Service
Settings
Use the following configuration example to set the system to perform as an Emergency-CSCF and configure the CSCF
service:
service: