Cisco Cisco WT2750 Multipoint Broadband Wireless System Manual Técnico
Frequencies for Point−to−Multipoint Wireless
Systems (UNII and MMDS)
Systems (UNII and MMDS)
Document ID: 5115
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
UNII Frequency Bands
Prerequisites
Requirements
Components Used
Conventions
UNII Frequency Bands
MMDS Frequency Bands (United States Only)
Related Information
Related Information
Introduction
This document lists the available frequencies you can configure on the Headend (uBR7200) for the
Point−to−Multipoint (P2MP) product in the Unlicensed National Information Infrastructure (UNII) and
Microwave Multipoint Distribution System (MMDS) bands. The purpose is to provide a quick reference sheet
that shows all available frequencies.
Point−to−Multipoint (P2MP) product in the Unlicensed National Information Infrastructure (UNII) and
Microwave Multipoint Distribution System (MMDS) bands. The purpose is to provide a quick reference sheet
that shows all available frequencies.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
Wireless networks
•
Command−line usage
•
In order to perform the tasks in this document, you must have privileged EXEC ("enabled") access on the
router.
router.
Components Used
The information in this document is based on these software and hardware versions:
The uBR7223, uBR7246, uBR7246VXR products
•
Any version of Cisco IOS® software that supports Fixed Wireless P2MP
•
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Conventions
Refer to Cisco Technical Tips Conventions for more information on document conventions.