Cisco Cisco TelePresence Video Communication Server Expressway
Appendix 2 – Troubleshooting
Cisco VCS Deployment Guide: Cisco VCS Expressway Starter Pack (X7.0)
Page 19 of 29
Appendix 2 – Troubleshooting
Movi sign in messaging
If there are problems signing in to Movi, a status message will be displayed, for example:
Possible messages include:
Login failed – Wrong username, domain, and / or password
Check and correct these items either at the Movi sign in, or on the Cisco VCS. Mistyped domain
names are a common cause of this problem (see
names are a common cause of this problem (see
VCS configuration > Protocols > SIP >
Domains
). The Movi SIP domain must match a SIP domain on the Cisco VCS that is provisioning
the Movi and that Movi will register to.
Check that Cisco VCS allow / deny lists are not preventing the registration.
Check that the Default Zone is configured with an Authentication policy of Check credentials or
Treat as authenticated.
•
Treat as authenticated.
•
Movi sign ins will fail if the Authentication policy is Do not check credentials.
•
If authentication is set to Check credentials (recommended) the appropriate username and
password must be configured in the local authentication database.
password must be configured in the local authentication database.
Login usernames are case sensitive. Check that the account username, the authentication
credential name, and the Movi sign in username all match exactly.
•
credential name, and the Movi sign in username all match exactly.
•
If the Movi sign in username and the authentication credential name do not match then the
initial Subscribe will be rejected as unauthorized.
initial Subscribe will be rejected as unauthorized.
•
If the Movi sign in username and the account username do not match then the Subscribe is
authenticated but the Notify is sent with Reason: rejected; Content length: 0.
authenticated but the Notify is sent with Reason: rejected; Content length: 0.