Cisco Cisco Web Security Appliance S160 Guia Da Instalação
14
Note
If you ordered a NIC card with your appliance, see the
detailed information in the PCI NIC Slot
Configurations section of the Cisco 380 and Cisco 680
Series Hardware Installation Guide.
detailed information in the PCI NIC Slot
Configurations section of the Cisco 380 and Cisco 680
Series Hardware Installation Guide.
Item
Port
Description
1
P1
Indicates proxy port. Connect P1 to the
network for both incoming and
outgoing traffic.
network for both incoming and
outgoing traffic.
2
P2
Indicates proxy port. When both P1 and
P2 are enabled, you must connect P1 to
the internal network and P2 to the
Internet. P1 and P2 can connect to L4
switch, WCCP router, or network
switch.
P2 are enabled, you must connect P1 to
the internal network and P2 to the
Internet. P1 and P2 can connect to L4
switch, WCCP router, or network
switch.
3
T1
Indicates traffic monitor port T1 for
Duplex Ethernet tap: One cable for all
incoming and outgoing traffic.
Duplex Ethernet tap: One cable for all
incoming and outgoing traffic.
4
T2
Indicates traffic monitor port. Simplex
Ethernet tap: Ports T1 and T2. One
cable for all packets destined for the
internet (T1), and one cable for all
packets coming from the Internet (T2).
Ethernet tap: Ports T1 and T2. One
cable for all packets destined for the
internet (T1), and one cable for all
packets coming from the Internet (T2).
303502
PSU1
PSU2
1
2
3
4
Management
Management