Cisco Cisco UCS 6120XP 20-Port Fabric Interconnect Manual Técnico
Unified Computing System Quality of Service
Configuration Example
Configuration Example
Document ID: 110509
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Configure
Network Diagram
System Classes
QoS Policies
Verify
Troubleshoot
Related Information
Prerequisites
Requirements
Components Used
Conventions
Configure
Network Diagram
System Classes
QoS Policies
Verify
Troubleshoot
Related Information
Introduction
Cisco Unified Computing System (UCS) provides two methods to implement quality of service (QoS):
System Classes Specifies the bandwidth allocation for certain types of traffic across the entire
system.
system.
•
QoS Policies Assigns system classes for individual vNICs and vHBAs.
•
Prerequisites
Requirements
Cisco recommends that you have knowledge of Cisco UCS software and hardware administration.
Ensure that you meet these requirements before you attempt this configuration:
Components Used
The information in this document is based on Cisco UCS.
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a default configuration. If your network is live, make sure that you
understand the potential impact of any command.
devices used in this document started with a default configuration. If your network is live, make sure that you
understand the potential impact of any command.
Conventions
Refer to the Cisco Technical Tips Conventions for more information on document conventions.