Cisco Cisco 1900 2900 3900 Series 8-Port Gigabit Ethernet HS-WIC with PoE
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2010 Cisco Systems, Inc. All rights reserved.
Configuring the HWIC-1VDSL
First Published: March 17, 2010
This document describes how to configure the HWIC-1VDSL. The HWIC-1VDSL can be installed on
the Cisco Integrated Services Routers Generation 2 (ISR G2) family platforms and can deploy services
such as voice, video, and data. It supports the following features:
the Cisco Integrated Services Routers Generation 2 (ISR G2) family platforms and can deploy services
such as voice, video, and data. It supports the following features:
•
Very-high-data-rate digital subscriber line 2 (VDSL2) profiles: 8a, 8b, 8c, 8d, 12a, 12b, and 17a
•
ITU-T G.993.2 protocol
•
Flash Firmware Upgrade
•
WAN Ethernet Support in VDSL Packet Transfer Mode (PTM) support, using 64/65 802.3ah format
•
IEEE802.1q support: VLAN tagged frames supported in Ethernet mode of VDSL
HWIC-1VDSL is the SKU for the single port HWIC-1VDSL.
Finding Feature Information in This Module
Your Cisco IOS software release may not support all of the features documented in this module.
Finding Support Information for Platforms and Cisco IOS Software Images
Use Cisco Feature Navigator to find information about platform support and Cisco IOS software image
support. Access Cisco Feature Navigator at
support. Access Cisco Feature Navigator at
. You must have an account on
Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at
the login dialog box and follow the instructions that appear.
the login dialog box and follow the instructions that appear.
Contents
•
•
•
•
•
•