Cisco Cisco Catalyst 6000 Multilayer Switch Feature Card MSFC2 Ficha De Dados

Data Sheet

Page 1 of 19

Cisco Catalyst 6500 Series 10/100 and 10/100/1000
Ethernet Interface Modules

As the premier Cisco

modular multilayer switch, the Cisco Catalyst

6500 Series delivers secure,

converged services from the wiring closet to the core, to the data center, and to the WAN edge.

The Cisco Catalyst 6500 Series provides the broadest selection of 10/100 and 10/100/1000 Ethernet media, Power

over Ethernet (PoE) (inline power) options, densities, performance, interoperability, and chassis deployment options.

From basic wiring closets and small campus distribution and core layers to high-performance data centers, the Cisco

Catalyst 6500 Series 10/100BASE-TX modules scale from 16 ports up to 1152 ports, and the 10/100/1000BASE-TX

modules scale from 16 ports up to 576 ports in a single Cisco Catalyst 6500 Series chassis. Cisco Catalyst 6500

Series10/100 and 10/100/1000 modules are the key enablers of a Borderless Network access solution. Cisco with the

Catalyst 6500 is the best choice for architecting and deploying holistic, cost-effective network access architecture.

Securely connecting to anyone, anywhere, using any device. These modules are available in copper unshielded

twisted-pair (UTP) and shielded twisted-pair (STP) using RJ-45 or RJ-21 making it the most widely deployed Cisco IP

Telephony port enabled campus switch.

Note: Refer to the “Cisco Catalyst 6500 Series Mixed-Media Gigabit Ethernet Interface Modules” data sheet for
information about modular physical layer deployment options using gigabit interface converters (GBICs) and Small

Form-Factor Pluggable (SFP) form factors.

●

IEEE 802.3af PoE support (for example, IP phone and wireless access point)

—These modules

support PoE field upgrade, network-interface-card (NIC) and phone auto detection (phone discovery),

and voice VLANs.

●

IEEE 802.3at PoE+ support

—Providing support for up to 30W per device. IEEE 802.3at is ideal for IP

telephony, wireless LAN access points and thin client deployments

●

Simplified network operation with cable fault detection

—These modules offer the ability to test cabling

using a time domain reflectometer (TDR), which sends signals down the cable to identify faults in each twisted

pair (available on some 10/100 and all 10/100/1000 Ethernet-over-copper interface modules).

●

Range of port densities

—These modules are available with 16 to 96 ports per module, enabling up to

1152 10/100BASE-TX ports or 576 10/100/1000BASE-TX ports per 13-slot chassis (configured with 12

interface modules).

●

Scalable and predictable system performance

—These modules provide a selection of switch-fabric

connections and throughput options: 32-, 256-, and 720-Gbps bandwidth with a system throughput of: 15, 30,

210, and up to 400 Mpps.

●

IEEE 802.3 triple-speed autonegotiation

—These modules allow switches to negotiate speed (10, 100, and

1000 Mbps) and duplex mode (half or full) with attached devices.

●

Superior traffic management

—These modules are available with large (up to 1 MB per interface) buffers

and up to 4 transmit queues to aid in congestion avoidance, traffic prioritization, and policing; multiple

thresholds can be configured to manage differentiated levels of service.