Cisco Cisco UCS C210 M1 General-Purpose Rack-Mount Server White Paper
41 © 2016 Cisco and/or its affiliates. All rights reserved.
Add an RDM Disk to a StorMagic VSA
Create a mapping file that resides on a VMFS data store and points to the LUN. Although the mapping file has the same
.vmdk extension as a regular virtual disk file, the mapping file contains only mapping information. The virtual disk data is stored
directly on the LUN. The mapping file to an RDM is created by using the
.vmdk extension as a regular virtual disk file, the mapping file contains only mapping information. The virtual disk data is stored
directly on the LUN. The mapping file to an RDM is created by using the
vmkfstools command:
{root@esxi1~]# vmkfstools -z /vmfs/devices/disks/naa.device_id /vmfs/volumes/SvSAN_LocalDisk/SvSAN-
C240M4-01/rawdisk-naa.device_id.vmdk
1. Right-click a virtual machine in the inventory and select
Edit Settings.
2. Click
Add and select Hard Disk; then click Next.
3. In the
Select a Disk window, select Use an Existing Virtual Disk.
4. In the
Select Existing Disk window, click Browse and select the RDM that was created using the vmkfstools command
(Figure 52).
Figure 52. Selecting the RDM