Cisco Cisco Gigabit Ethernet Switch Module (CGESM) for HP Referências técnicas
2-76
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem Command Reference Guide
380265-002
Chapter 2 CGESM Switch Cisco IOS Commands
dot1x initialize
dot1x initialize
Use the dot1x initialize privileged EXEC command to manually return the specified
IEEE 802.1x-enabled port to an unauthorized state before initiating a new authentication session on the
port.
IEEE 802.1x-enabled port to an unauthorized state before initiating a new authentication session on the
port.
dot1x initialize interface interface-id
Syntax Description
Defaults
There is no default setting.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
Use this command to initialize the IEEE 802.1x state machines and to set up a fresh environment for
authentication. After you enter this command, the port status becomes unauthorized.
authentication. After you enter this command, the port status becomes unauthorized.
There is not a no form of this command.
Examples
This example shows how to manually initialize a port:
Switch# dot1x initialize interface gigabitethernet0/2
You can verify the unauthorized port status by entering the show dot1x [interface interface-id]
privileged EXEC command.
privileged EXEC command.
Related Commands
interface interface-id
Port to be initialized.
Release
Modification
12.2(25)SE1
This command was introduced.
Command
Description
[interface interface-id]
Displays IEEE 802.1x status for the specified port.