Cisco Cisco Gigabit Ethernet Switch Module (CGESM) for HP Referências técnicas

Use the mac address-table static global configuration command to add static addresses to the MAC 
address table. Use the no form of this command to remove static entries from the table.

mac address-table static mac-addr vlan vlan-id interface interface-id

no mac address-table static mac-addr vlan vlan-id [interface interface-id]

No static addresses are configured.

Global configuration

This example shows how to add the static address c2f3.220a.12f4 to the MAC address table. When a 
packet is received in VLAN 4 with this MAC address as its destination, the packet is forwarded to the 
specified interface:

Switch(config)# mac address-table static c2f3.220a.12f4 vlan 4 interface 

You can verify your setting by entering the show mac address-table privileged EXEC command.

Destination MAC address (unicast or multicast) to add to the address 
table. Packets with this destination address received in the specified 
VLAN are forwarded to the specified interface.

vlan vlan-id

Specify the VLAN for which the packet with the specified MAC address 
is received. The range is 1 to 4094.

interface interface-id 

Interface to which the received packet is forwarded. Valid interfaces 
include physical ports and port channels.

12.2(25)SE1

This command was introduced.

Displays static MAC address table entries only.