Cisco Cisco Gigabit Ethernet Switch Module (CGESM) for HP Referências técnicas
2-409
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem Command Reference Guide
380265-002
Chapter 2 CGESM Switch Cisco IOS Commands
show vlan
This is an example of output from the show vlan summary command:
Switch> show vlan summary
Number of existing VLANs : 8
Number of existing VTP VLANs : 8
Number of existing extended VLANs : 0
This is an example of output from the show vlan id command.
Switch# show vlan id 1
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Gi0/1, Gi0/2, Gi0/3, Gi0/4
Gi0/5, Gi0/6, Gi0/7, Gi0/8
Gi0/9, Gi0/10, Gi0/11, Gi0/12
Gi0/13, Gi0/14, Gi0/15, Gi0/16
Gi0/17, Gi0/18
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 0 0
Remote SPAN VLAN
----------------
Disabled
Primary Secondary Type Ports
------- --------- ----------------- ------------------------------------------
BrdgNo
Bridge number for the VLAN, if applicable.
Stp
Spanning Tree Protocol type used on the VLAN.
BrdgMode
Bridging mode for this VLAN—possible values are source-route bridging
(SRB) and source-route transparent (SRT); the default is SRB.
(SRB) and source-route transparent (SRT); the default is SRB.
Trans1
Translation bridge 1.
Trans2
Translation bridge 2.
Remote SPAN VLANs
Identifies any RSPAN VLANs that have been configured.
Table 2-28
show vlan Command Output Fields (continued)
Field
Description