Cisco Cisco MGX 8880 Media Gateway
10
Release Notes for Cisco MGX 8880 Software Release 5.3.00
Part Number OL-8892-01 Revision B0, October 23, 2006
Release 5.2.10 Features
AXSM-8-622-XG Service Module
The AXSM-8-622-XG Service Module is supported on the MGX 8880 in Release 5.3.00.
The Cisco® 8-Port OC-12/STM-4 Channelized/Unchannelized ATM Switch Service Module is a line
card for use in the Cisco MGX® 8800 Media Gateway in combination with the Cisco PXM-45 Processor
Switch Module . This ATM switch service module has eight physical 622 Mbps interfaces that can be
used to deliver high-density OC-12 or STM-4 trunking/User-Network Interface (UNI) or aggregation of
sub-OC-12 traffic through port channelization.
card for use in the Cisco MGX® 8800 Media Gateway in combination with the Cisco PXM-45 Processor
Switch Module . This ATM switch service module has eight physical 622 Mbps interfaces that can be
used to deliver high-density OC-12 or STM-4 trunking/User-Network Interface (UNI) or aggregation of
sub-OC-12 traffic through port channelization.
Up to 12 Cisco 8-port OC-12/STM-4 ATM switch service modules can reside in the MGX 8880 to
provide support for up to 96 OC-12c/STM-4 interfaces for service providers that require both high
bandwidth and high network availability.
provide support for up to 96 OC-12c/STM-4 interfaces for service providers that require both high
bandwidth and high network availability.
The AXSM-8-622-XG service module is used in conjunction with the SFP-4-622 back card. This card
is a 4-port SFP back card for OC-12/STM-4 interfaces.
is a 4-port SFP back card for OC-12/STM-4 interfaces.
Key Features
•
Individual port channelization down to DS-3 and OC-3c/STM-1
•
Per-virtual path and per-virtual circuit traffic shaping and available-bit-rate (ABR) with virtual
source and virtual destination
source and virtual destination
•
APS (1:1 and 1+1) port redundancy, plus APS 1+1 card redundancy
•
Up to four million cell buffers
•
Up to 16 classes of service (CoSs) that can be used to support IP or ATM services
•
Support for standards-based Private Network-Network Interface (PNNI), switched virtual circuit
(SVC) and switched virtual path (SVP), soft permanent virtual connection (SPVC) and soft
permanent virtual path (SPVP), and Multiprotocol Label Switching (MPLS) services
(SVC) and switched virtual path (SVP), soft permanent virtual connection (SPVC) and soft
permanent virtual path (SPVP), and Multiprotocol Label Switching (MPLS) services
Release 5.2.10 Features
Maintenance Release 5.2.10 does not introduce new Cisco MGX 8880 features or enhancements.
Release 5.2.00 Features
Release 5.2.00 introduced the following hardware:
•
MGX-VXSM-T3 front card
•
VXSM-BC-3T3 back card
MGX-VXSM-T3 Card
Cisco MGX 8880 Release 5.2.00 introduced a third VXSM card for the support of T3 lines. The card
consists of a front card with six T3 ports and a half-height back card with three T3 ports. The front card
can be configured with either one back card or two back cards.
consists of a front card with six T3 ports and a half-height back card with three T3 ports. The front card
can be configured with either one back card or two back cards.