Cisco Cisco Access Registrar 5.0 Guia De Resolução De Problemas

Adding Multiple Cisco AV−Pairs to a User Profile in
Access Registrar

Document ID: 13835

Contents

Introduction
Prerequisites
Requirements
Components Used
Conventions
Procedure
Related Information

Introduction

Different vendors have extended the standard attribute value pairs (AV−pairs) to satisfy specific needs. The
AV−pairs introduced by Cisco are collectively called Vendor Specific Attributes, one of which is called Cisco
AV−pair.

This document explains how to add multiple Cisco AV−pairs, or any multi−valued attribute, to a user profile.

Prerequisites

Requirements

There are no specific requirements for this document.

Components Used

The information in this document is based on these software and hardware versions:

Solaris 8

•

Access Registrar 3.0R8

•

The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.

Conventions

For more information on document conventions, refer to the Cisco Technical Tips Conventions.

Procedure

Cisco AV−pairs, or multi−valued attributes, cannot be added one at a time. If added one at a time, only the
last AV−pair, or attribute remains because it overwrites the others.

The correct syntax to use is: