Cisco Cisco WAE Planning
29-2
WAE Platform Configuration Guide
Chapter 29 MATE GUI and Remote WAE Core Server
Step 3
Identify how to connect to the server by selecting the appropriate protocol and entering the port number
(for example, HTTP 7777).
(for example, HTTP 7777).
Step 4
If the authentication is enabled, enter the same username and password.
Step 5
Optional: Save the data you entered for future use.
•
To save all settings except the password, select Save Settings.
•
To save the password for future use, select Save Password.
Step 6
If using a staging area for this access, enter the stage ID number.
Step 7
If saving a plan file, select the operation, as follows.
•
Load Plan—Save a plan file to the WAE Core server. No further processing is done to this plan file
on the platform.
on the platform.
•
Process Plan—Save a plan file to the WAE Core server and simulate failure scenarios such that upon
querying a demand, worst-case analysis is automatically performed on interfaces, circuits, and
SRLGs.
querying a demand, worst-case analysis is automatically performed on interfaces, circuits, and
SRLGs.
•
Deploy Plan—Compare the plan file with the working plan file that currently resides in the Plan
Module, and then deploy the differences (LSPs only) directly to the network. A copy of it is also
saved to the working plan file area in the Plan Module.
Module, and then deploy the differences (LSPs only) directly to the network. A copy of it is also
saved to the working plan file area in the Plan Module.
Step 8
Click OK.