Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Cisco
  4. Cisco TelePresence MX700
  5. Referências técnicas

Cisco Cisco TelePresence MX700 Referências técnicas

Download
Página de 194
D15335.03
 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.1, APRIL 2016. 
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 
81
Cisco TelePresence MX700 and MX800
API Reference Guide
xConfiguration SIP Ice Mode
ICE (Interactive Connectivity Establishment, RFC 5245) is a NAT traversal solution that the video 
systems can use to discover the optimized media path. Thus the shortest route for audio and 
video is always secured between the video systems.
Requires user role: ADMIN
Default value: Auto
USAGE:
xConfiguration SIP Ice Mode: 
Mode
where
Mode
: Auto/Off/On
Auto: ICE is enabled if a TURN server is provided, otherwise ICE is disabled.
Off: ICE is disabled.
On: ICE is enabled.
xConfiguration SIP Ice DefaultCandidate
The ICE protocol needs some time to reach a conclusion about which media route to use (up to 
the first 5 seconds of a call). During this period media for the video system will be sent to the 
Default Candidate as defined in this setting.
Requires user role: ADMIN
Default value: Host
USAGE:
xConfiguration SIP Ice DefaultCandidate: 
DefaultCandidate
where
DefaultCandidate
: Host/Rflx/Relay
Host: Send media to the video system's private IP address.
Rflx: Send media to the video system's public IP address, as seen by the TURN server.
Relay: Send media to the IP address and port allocated on the TURN server.
xConfiguration SIP Ice OfferTcpCandidates
Define whether or not the video system supports sending and receiving media over TCP 
connections.
Requires user role: ADMIN
Default value: Off
USAGE:
xConfiguration SIP Ice OfferTcpCandidates: 
OfferTcpCandidates
where
OfferTcpCandidates
: Off/On
Off: The video system does not allow media over TCP connections.
On: The video system allows media over TCP connections.
xConfiguration SIP ListenPort
Turn on or off the listening for incoming connections on the SIP TCP/UDP ports. If turned off, 
the endpoint will only be reachable through the SIP registrar (CUCM or VCS). It is recom-
mended to leave this setting at its default value.
Requires user role: ADMIN
Default value: On
USAGE:
xConfiguration SIP ListenPort: 
ListenPort
where
ListenPort
: Off/On
Off: Listening for incoming connections on the SIP TCP/UDP ports is turned off.
On: Listening for incoming connections on the SIP TCP/UDP ports is turned on.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xConfiguration