Cisco Cisco TelePresence MX700 Manual De Manutenção

Cisco TelePresence Endpoints and Cisco Unified Communications Manager 

Deployment Guide

D15336.01 Deployment gude for TelePresence Endpoints on CUCM, DECEMBER 2015.

www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved. 

29

1

  Keep the default setting for the other Provisioning parameters. 

2

 The DHCP server may be set up to provide the External Manager address automatically (DHCP Option 150). If so, you should not enter an address 

manually. A manually added address will override the address provided by DHCP.

Endpoint provisioning

Provisioning allows the video conferencing network administrators 

to manage many video systems simultaneously. In general, you 

only have to put in the provisioning server credentials to each 

video system; the rest of the configuration is done automatically.

External Manager address

If the network does not offer DHCP Option 150, the External 

Manager Address must be added manually. Note that any input 

in the External Manager Address field will override the setting 

provided by DHCP.

When the infrastructure is set to 

; then CDP (Cisco 

Discovery Protocol) is enabled and if CDP is successful, the 

endpoint will discover DHCP Option 150. In this case you can 

leave the External Manager Address field blank, as the DHCP 

server will provide the address automatically. 

When the infrastructure is set to 

,  the 

External Manager address is determined by DNS lookup in the 

domain that is configured on the endpoint. If successful, you can 

leave the External Manager Address field blank.

CTL and ITL files

Normally, you will not delete the old Certificate Trust List (CTL) or 

Initial Trust List (ITL), but there are few cases were you will need to 

delete these files from the endpoint such as:

•  When changing the CUCM IP address.
•  When moving the endpoint between CUCM clusters.
•  When you need to re-generate or change the CUCM 

certificate.

Setting up CUCM provisioning

Please contact your Cisco Unified Communications Manager 

(CUCM) provider if in doubt for any of the provisioning parameters

Configure the provisioning

1

Open a web browser, enter the endpoint's IP address, and log in 

with your user name and password. If a password is currently not 

set, use a blank password when logging in.

1.  Navigate to 

2.  Navigate to 

 and set the provisioning mode to 

. 

Click 

.

3. 

If required

: Navigate to 

 and enter 

IP address or DNS name of the External Manager (the CUCM 

cluster TFTP server address)

2

. Click 

.

4. 

If required

: Delete the certificate files (CTL/ITL). Navigate to 

, open the 

 tab,

and click 

.

Contents

Introduction

CUCM configuration

Endpoint configuration

Appendices

Contact

Endpoint configuration