Cisco Cisco TelePresence MX700 Manual De Manutenção
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
D15331.04 MX700 and MX800 Administrator Guide CE8.2, OCTOBER 2016.
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
70
Cisco TelePresence MX700 and MX800
Administrator Guide
Configure the video system
1. Sign in to the web interface, and navigate to
Setup >
Room Types
.
2. Click the
Briefing
thumbnail to push the corresponding
configuration to the video system.
Note that the cameras and displays must be
Note that the cameras and displays must be
connected as described in the
chapter.
Change room mode while in a conference
These are the pre-defined modes for the Briefing room:
• Local Presenter (the presenter is in the room)
• Remote Presenter (the presenter is calling in)
• Discussions (for discussions between different sites
• Remote Presenter (the presenter is calling in)
• Discussions (for discussions between different sites
with local presenter in the room)
Switching from one mode to another implies changing the
camera input sources and changing the remote and local
screen layouts.
Switch to another room mode manually
While in a conference, you can switch to another mode
using the Touch controller.
1. Tap
Layout
on the Touch controller.
2. Tap the thumbnail that represents the mode you want
to change to.
Switch room modes automatically
Only supported with Cisco TelePresence Precision 60
as Presenter camera, and the PresenterTrack feature
enabled (
Cameras PresenterTrack Enabled
set to
True).
1. Sign in to the web interface, and navigate to
Setup >
Configuration
.
2. Use the
Cameras > PresenterTrack >
PresenterDetectedStatus
setting to determine
whether to enable (default) or disable automatic
switching between Local Presenter and Remote
Presenter modes. The room mode will not change
automatically if the current mode is Discussions.
Automatic switching implies:
• The system switches to Local Presenter mode when a
person is detected in the PresenterTrack trigger zone.
• The system switches to Remote Presenter mode
when the local presenter, who is tracked, leaves the
stage.
• If someone in the local audience asks a question,
while the system is in Local Presenter mode, the
system sends split-screen video of both the presenter
and the person asking the question. This requires
Cisco TelePresence SpeakerTrack 60 as Audience
camera, and that speaker tracking is switched on.
Briefing room set-up
(page 3 of 3)
Room mode thumbnails
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices
Peripherals