Cisco Cisco TelePresence MX700 Manual De Manutenção

D15331.02 MX700 and MX800 Administrator Guide CE8.1, APRIL 2016.  

www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved. 

52

Cisco TelePresence MX700 and MX800

Administrator Guide

Connect external monitors 

(page 2 of 3)

Automatic setup

There is no special configuration needed on the video system in 

order to support dual monitors or triple monitors scenarios. By 

default the number of monitors are auto-detected, and the role 

of each monitor - whether it is intended to be the first, second, 

or third monitor - is automatically set according to the physical 

connections.

For example, if the total number of monitors are three, the 

following settings will be assumed when set to 

Auto:

• 

 : 

Triple 

• 

 : 

First

• 

 : 

Second

• 

 : 

Third

These settings can be changed if necessary, but for ease of use 

no configuration is required in order to use the default values.

When do you need manual setup

You can override the default behavior by setting one or more 

settings manually. You need manual setup when you want to:

•  Dedicate a monitor to only show presentations
•  Use one of the outputs for a recorder
•  Replicate the same layout on more than one monitor
•  Show the on-screen messages and indicators (OSD) on 

another monitor than the video output with the lowest number

•  Set the resolution manually, e.g. if the video system fails to 

detect the native resolution and refresh rate of a monitor

Introduction

Configuration

Peripherals

Maintenance

System settings

Appendices



Peripherals