Cisco Cisco TelePresence MX700 Manual De Manutenção

D15119.01 MX700 and MX800 Administrator Guide TC7.1.2, JUNE 2014.

118

Cisco TelePresence MX700 and MX800

Administrator Guide

LED indicators

Codec LEDs
System failure:

Lights steady (red) when there is a

serious problem with the codec.

Power:

Lights steady (white) when the codec

has power.

Sub-system failure LEDs
There are four LEDs underneath the

monitor(s). Normally, they are not lit.

A steady red light indicates serious error,

and you should contact the Cisco support

organization.

The LEDs mean (numbered from left to right):

1. Monitor failure.
2. Power failure for LCD monitor or camera

sub-systems.

3. Power failure for audio sub-system.
4. Power failure for LCD monitor backlight.

Sub-system failure LEDs

Codec LEDs
You must remove the

side cover to be able to

see the codec LEDs.
The side cover is

fastened with magnets.

Camera failure LED

Codec LEDs
You must remove the

side cover to be able to

see the codec LEDs.
The side cover is

fastened with magnets.

System LED / Camera failure LED

This LED operates as both system LED

and camera failure LED for the right

camera in a dual camera assembly.

The Camera LED and System LED positions for MX700 with a dual camera is the same as ilustrated for MX800 with a dual camera.

The Camera LED and System LED positions for MX800 with a single camera is the same as ilustrated for MX700 with a single camera.

System LED / Camera failure LED

This LED operates as both system

LED and camera failure LED.

System LED
Blinking:

The video system is starting up.

Pulsating:

The video system is in standby mode.

Camera failure LED

Steady red light:

The camera has a serious error.

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices