Cisco Cisco TelePresence MX700 Manual De Manutenção
D15119.01 MX700 and MX800 Administrator Guide TC7.1.2, JUNE 2014.
www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
58
Cisco TelePresence MX700 and MX800
Administrator Guide
Audio Input Line [1..4] Equalizer Mode
Set the audio input line equalizer mode.
Requires user role: ADMIN
Value space: <Off/On>
Value space: <Off/On>
Off: No equalizer.
On: Enable the equalizer for the audio input line.
On: Enable the equalizer for the audio input line.
Example:
Audio Input Line 1 Equalizer Mode: Off
Audio Input Line [1..4] VideoAssociation MuteOnInactiveVideo
Enable association of a video source to a Line audio input.
Requires user role: ADMIN
Value space: <Off/On>
Value space: <Off/On>
Off: No video source is associated.
On: A video source is associated, and the audio will be muted if the associated video source
On: A video source is associated, and the audio will be muted if the associated video source
is not displayed.
Example:
Audio Input Line 1 VideoAssociation MuteOnInactiveVideo: Off
Audio Input Line [1..4] VideoAssociation VideoInputSource
Select the associated video input source.
Requires user role: ADMIN
Value space: <1/2/3>
Value space: <1/2/3>
Range: Select one of the video input sources.
Example:
Audio Input Line 1 VideoAssociation VideoInputSource: 1
Audio Input Line [1..4] Channel
Define whether the Audio Line input is a mono signal or part of a multichannel signal.
Requires user role: ADMIN
Value space: <Right/Left/Mono>
Value space: <Right/Left/Mono>
Right: The Audio Line input signal is the right channel of a stereo signal.
Left: The Audio Line input signal is the left channel of a stereo signal.
Mono: The Audio Line input signal is a mono signal.
Left: The Audio Line input signal is the left channel of a stereo signal.
Mono: The Audio Line input signal is a mono signal.
Example:
Audio Input 1 Channel: Left
Audio Input Line [1..4] Level
Define the audio level of the Line input connector, in steps of 1 dB.
See the Audio Level tables in the Physical Interfaces Guide for the codec for a complete
See the Audio Level tables in the Physical Interfaces Guide for the codec for a complete
overview of the menu values represented in dB.
Requires user role: ADMIN
Value space: <0..24>
Value space: <0..24>
Range: Select a value from 0 to 24 dB.
Example:
Audio Input Line 1 Level: 10
Audio Input Line [1..4] Mode
Set the audio input line mode.
Requires user role: ADMIN
Value space: <Off/On>
Value space: <Off/On>
Off: Disable the Audio Line input.
On: Enable the Audio Line input.
On: Enable the Audio Line input.
Example:
Audio Input Line 1 Mode: On
Contents
Introduction
Web interface
System settings
Setting passwords
Appendices
System settings