Cisco Cisco TelePresence MX700 Manual De Manutenção

D14850.08 MX200 and MX300 Administrator Guide TC7.0, DECEMBER 2013.

Cisco TelePresence MX200 and MX300

Administrator Guide

Navigate to: Call Control

Snapshots from your video system

Far end snapshots

Capturing snapshots

The snapshot feature, which is disabled by default, allows

snapshots captured by your video system to be displayed

on the Call Control page. Captures from your video system’s

camera as well as from its presentation channel will be

displayed.

This feature might come in handy when administering the

video system from a remote location, e.g. to check the

camera view.

To use web snapshots you have to sign in with ADMIN

credentials.

Enabling the snapshot feature

The snapshot feature is disabled by default. The feature must

be enabled using the Touch controlle

• Open the

Settings

menu on the Touch controller and tap

Administrator

. You have to log in with an administrator

user name and password to get access to the

Administrator

menu.

• Tap

Web Snapshots

and choose

ON.

Far end snapshots while in a call

While in a call, snapshots of the remote participant’s main

camera and presentation channel (far end) will be captured

and displayed as shown in the illustration. The snapshots are

updated approximately every 30 seconds.

Far end snapshots are captured even if web

snapshots are disallowed on the far end video

system. Web snapshots are prohibited only for

encrypted calls.

Take live snapshots

While the

Live snapshots

box is checked,

snapshots are captured by your video

system (main source and presentation

source) approximately every two seconds.

Click the snapshot in order

to see a larger image.

* The

Settings

menu can be accessed from the drop down window

that appears when you tap the contact information in the upper, left

corner of the Touch controller.

Contents

Introduction

System settings

Setting passwords

Appendices

Web interface