Cisco Cisco TelePresence MX700 Manual De Manutenção

D14850.08 MX200 and MX300 Administrator Guide TC7.0, DECEMBER 2013.  

www.cisco.com — Copyright © 2011–2013 Cisco Systems, Inc. All rights reserved. 

46

Cisco TelePresence MX200 and MX300  

Administrator Guide

System recovery: Revert to the 

previously used software version

If there is a severe problem with the video system, switching 

to the previously used software version may help solving the 

problem. The previously used software image still resides 

on the system, so you do not have to download the software 

again.

Reverting to the previously used software version should only 

be done by a system administrator or in contact with Cisco 

technical support.

We strongly recommend that you backup your system’s log 

files and configuration before you swap to the other software 

image.

Navigate to: Maintenance > System Recovery : Backup tab and Software Recovery Swap tab

1.  Revert to the previously used software 

version by clicking 

, where x.y.z indicates the 

software version.

2.  Click 

 to confirm your choice, or 

 if you have changed your mind.

Wait while the system resets. The 

system will restart automatically when 

finished.

1. Backing up log files and 

system configuration
We recommend that you backup your 

system’s log files and configuration before 

you swap to the other software image.

Click 

and

 and follow the 

instructions to save the files on your 

computer.

2. Reverting to the previously used 

software version

Contents

Introduction

System settings

Setting passwords

Appendices

Web interface

Web interface