Cisco Cisco TelePresence MX700 Manual De Manutenção

D14850.07 MX Series Administrator Guide TC6.3, OCTOBER 2013.

Cisco TelePresence MX Series

Administrator Guide

Conference [1..1] DefaultCall Rate

Set the Default Call Rate to be used when placing calls from the system.

Requires user role: ADMIN
Value space: <64..6000>

Range: Select a value between 64 and 6000 kbps.

Example:

Conference 1 DefaultCall Rate: 768

Conference [1..1] MaxTransmitCallRate

Specify the maximum transmit bit rate to be used when placing or receiving calls. Note that this

is the maximum bit rate for each individual call; use the Conference MaxTotalTransmitCallRate

setting to set the aggregated maximum for all simultaneous active calls.

Requires user role: ADMIN
Value space: <64..6000>

Range: Select a value between 64 and 6000 kbps.

Example:

Conference 1 MaxTransmitCallRate: 6000

Conference [1..1] MaxReceiveCallRate

Specify the maximum receive bit rate to be used when placing or receiving calls. Note that this

is the maximum bit rate for each individual call; use the Conference MaxTotalReceiveCallRate

setting to set the aggregated maximum for all simultaneous active calls.

Requires user role: ADMIN
Value space: <64..6000>

Range: Select a value between 64 and 6000 kbps.

Example:

Conference 1 MaxReceiveCallRate: 6000

Conference [1..1] MaxTotalTransmitCallRate

This configuration applies when using a video system's built-in MultiSite feature (optional) to

host a multipoint video conference.
Specify the maximum overall transmit bit rate allowed. The bit rate will be divided fairly among

all active calls at any time. This means that the individual calls will be up-speeded or down-

speeded as appropriate when someone leaves or enters a multipoint conference, or when a call

is put on hold (suspended) or resumed.
The maximum transmit bit rate for each individual call is defined in the Conference

MaxTransmitCallRate setting.

Requires user role: ADMIN
Value space: <64..10000>

Range: Select a value between 64 and 10000.

Example:

Conference 1 MaxTotalTransmitCallRate: 9000

Conference [1..1] MaxTotalReceiveCallRate

This configuration applies when using a video system's built-in MultiSite feature (optional) to

host a multipoint video conference.
Specify the maximum overall receive bit rate allowed. The bit rate will be divided fairly among

all active calls at any time. This means that the individual calls will be up-speeded or down-

speeded as appropriate when someone leaves or enters a multipoint conference, or when a call

is put on hold (suspended) or resumed.
The maximum receive bit rate for each individual call is defined in the Conference

MaxReceiveCallRate setting.

Requires user role: ADMIN
Value space: <64..10000>

Range: Select a value between 64 and 10000.

Example:

Conference 1 MaxTotalReceiveCallRate: 9000

Contents

Introduction

System settings

Setting passwords

Appendices

Web interface

System settings