Cisco Cisco Computer Telephony Integration Option 9.0 Guia Do Programador
8-9
CTI OS Developer’s Guide for Cisco ICM/IPCC Enterprise & Hosted Editions Release 7.1(1)
Chapter 8 Session Object
Methods
errorcode
An output parameter (return parameter in VB) that contains an error code
from
from
in
Return Values
Default CTI OS return values. See
Remarks
A successful request will result in an OnConnection event.
A failure will result in an OnConnectionFailure event. This means that the CIL is
in failover. The CIL will continue to attempt to connect, alternating between hosts
CTIOS_CTIOSA and CTIOS_CTIOSB until connection succeeds at which point
CIL will fire OnConnection. If application wishes to stop failover, it must call
Disconnect.
in failover. The CIL will continue to attempt to connect, alternating between hosts
CTIOS_CTIOSA and CTIOS_CTIOSB until connection succeeds at which point
CIL will fire OnConnection. If application wishes to stop failover, it must call
Disconnect.
In some cases, additional failure codes and events may occur:
•
Connect will return a failure code of -1 if it cannot connect with the initial
side of the duplexed CTIOS server pair chosen from the connect parameters.
This error code requires no action on the part of the developer as the CIL will
automatically attempt to connect using the parameters corresponding to the
other side of the duplexed pair.
side of the duplexed CTIOS server pair chosen from the connect parameters.
This error code requires no action on the part of the developer as the CIL will
automatically attempt to connect using the parameters corresponding to the
other side of the duplexed pair.
•
The CIL will retry the connection attempt five times and then will not attempt
to reconnect any longer. The final OnConnectionFailure event will contain
the keyword "FinalAttempt" which informs the client application that the CIL
has discontinued its attempts to reconnect.
to reconnect any longer. The final OnConnectionFailure event will contain
the keyword "FinalAttempt" which informs the client application that the CIL
has discontinued its attempts to reconnect.
PortA (optional)
INT
TCP/IP port for ctiosA, default = 42028.
PortB (optional)
INT
TCP/IP port for ctiosB, default = 42028.
Heartbeat (optional)
INT
Heartbeat time, expressed in seconds. If
not set, default heartbeats are
configurable on CTI OS server.
not set, default heartbeats are
configurable on CTI OS server.
Table 8-3
Connect Parameters (continued)