Cisco Cisco TelePresence MX700 Guia Do Utilizador
30
D1534502 User Guide
Cisco TelePresence SX10, SX20, MX200 G2,
MX300 G2, MX700, MX800, SX80
Produced: March 2016 for CE8.1
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.
Cisco TelePresence SX10, SX20, MX200 G2,
MX300 G2, MX700, MX800, SX80
Produced: March 2016 for CE8.1
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.
Conference Calls with Multiple Participants
Lock Speaker
Start with a layout showing
one the participants as the
prominent speaker, and tap
that speaker’s avatar.
Tap Lock as speaker.
Once activated the name
of this field will change to
Unlock as speaker.
To unlock, repeat the process
tapping Unlock as Speaker
instead.
This is an example of a layout with
one of the participants shown as the
prominent speaker, i.e. shown larger
than the other(s).
In a video conference with several
participants the one who speaks
will, as default, be shown as the
large image (provided you haven’t
set up the layout otherwise). This is
referred to as voice switching.
participants the one who speaks
will, as default, be shown as the
large image (provided you haven’t
set up the layout otherwise). This is
referred to as voice switching.
However, you may want to keep
showing one of the participants as
the prominent speaker, typically
shown larger than the others.
showing one of the participants as
the prominent speaker, typically
shown larger than the others.
To make this happen activate the
function Lock as speaker, as shown
on this page.
on this page.
About Lock speaker