Cisco Cisco TelePresence MX700 Guia Da Instalação

IP settings

(When not set by a provisioning system)

The IP parameters are assigned automatically by the network, 

or you can set everything manually. If your system is provi-

sioned automatically, manual IP settings may be overridden by 

the provisioning system.
If you want to set the parameters manually, contact your 

network administrator to obtain the required parameters.
If an IPv4 address is already assigned to the system, you will 

find it under 

: Navigate to the gearwheel 

icon in the upper left corner on the home screen and

select

If you wish to change the IP settings from the default dual 

stack setting to either IPv4 or IPv6, this can be done on the 

web interface. To set up IPv6 settings manually, use the Touch 

controller or the web interface.

NOTE: 

When you start your video system for the first time, the 

setup assistant starts automatically. It skips the IP settings, if 

those are already set up by the network.

1.  Navigate to the gearwheel icon

on the home screen, and 

select 

 

 

. Navigate to 

and

select 

.

2.  Uncheck 

and

, if you 

want to set the IP address manually.

3.  Enter the 

, 

 and 

 address. 

A soft keyboard appears when you select an input field. 

Select 

 to confirm the change.

4.  Navigate to the 

 section and enter the DNS server 

address in the 

 

input field.

5.  Select 

 to save the changes.

Cisco TelePresence Video Systems

D15318.03 Video Systems Getting Started Guide CE8.2, JUNE 2016. 

Copyright © 2016 Cisco Systems, Inc. All rights reserved. 

22

Getting Started Guide

Introduction

User interfaces

Web interface

Setup assistant

Appendices



Touch

Setup assistant