Cisco Cisco Firepower Management Center 2000
3
Firepower System Release Notes for Version 6.1.0 Pre-Installation Package
Installing the Pre-Installation Package to ASA FirePOWER module managed via ASDM
Note:
Appliances must be running at least Version 6.0.1 or later to apply the Version 6.1 Pre-Installation Package.
To update managed devices, NGIPSv devices, and ASA FirePOWER modules:
1.
Use the managing Firepower Management Center to deploy configuration changes to the managed 7000 and 8000 Series devices,
Firepower NGIPSv managed devices, and ASA FirePOWER modules. Otherwise, the eventual update may fail.
Firepower NGIPSv managed devices, and ASA FirePOWER modules. Otherwise, the eventual update may fail.
2.
If you are updating an ASA device, update to ASA Version 9.6.1 or later as described in the ASA/ASDM Release Notes.
3.
Download the update from the Support site:
—
for 7000 and 8000 Series managed devices:
Sourcefire_3D_Device_S3_6.1.0_Pre-install-6.0.1.999-30.sh
—
for Firepower NGIPSv:
Sourcefire_3D_Device_Virtual64_VMware_Preinstall-6.0.1.999-30.sh
—
for ASA with FirePOWER Services running on the ASA 5506-X, ASA 5506H-X, ASA 5506W-X, ASA 5508-X, ASA 5512-X,
ASA 5515-X, ASA 5516-X, ASA 5525-X, ASA 5545-X, ASA 5555-X, ASA 5585-X-SSP-10, ASA 5585-X-SSP-20, ASA
5585-X-SSP-40, and ASA 5585-X-SSP-60
ASA 5515-X, ASA 5516-X, ASA 5525-X, ASA 5545-X, ASA 5555-X, ASA 5585-X-SSP-10, ASA 5585-X-SSP-20, ASA
5585-X-SSP-40, and ASA 5585-X-SSP-60
Cisco_Network_Sensor_6.1.0_Pre-install-6.0.1.999-30.sh
Note
: Download the update directly from the Support site. If you transfer an update file by email, it may become corrupted.
4.
Upload the update to the Firepower Management Center by selecting System > Updates, then clicking Upload Update on the Product
Updates tab. Browse to the update and click Upload.
Updates tab. Browse to the update and click Upload.
The update is uploaded to the Firepower Management Center. The web interface shows the type of update you uploaded, its version
number, and the date and time it was generated.
number, and the date and time it was generated.
5.
Make sure that the appliances in your deployment are successfully communicating and that there are no issues reported by the health
monitor.
monitor.
6.
On the System > Updates page, click the install icon next to the update you are installing.
7.
Select the devices where you want to install the update.
If you are updating stacked 7000 and 8000 Series devices, selecting one member of the stack automatically selects the other devices
in the stack. You must update members of a stack together.
in the stack. You must update members of a stack together.
8.
Click Install. Confirm that you want to install the update. The update process begins.
9.
You can monitor the update's progress on the Tasks tab in the Firepower Management Center’s Message Center.
Caution:
If you encounter issues with the update (for example, if the Tasks tab indicates that the update has failed or if it shows no
progress for several minutes), do not restart the update. Instead, contact Support.
10.
Select Devices > Device Management and confirm that the devices you updated have the correct software version: Version 6.0.1.
11.
Verify that the appliances in your deployment are successfully communicating and that there are no issues reported by the health
monitor.
monitor.
12.
Redeploy policies to all managed devices.
Click the Deploy button and select all available devices, then click Deploy.
Installing the Pre-Installation Package to ASA FirePOWER module managed via
ASDM
ASDM