Cisco Cisco Firepower Management Center 2000
2
Firepower System Release Notes
Updating to Version 6.1.0
If you are updating a stacked 7000 and 8000 Series devices, selecting one member of the stack automatically selects the other devices in the
stack. You must update members of a stack together.
stack. You must update members of a stack together.
12.
Click Install. Confirm that you want to install the update and reboot the devices. The update process begins.
Note that rebooting the ASA FirePOWER module on an ASA 5585-X platform, including a reboot that occurs during a module upgrade, causes
traffic to drop for up to thirty seconds on the interfaces on the ASA FirePOWER hardware module while the module reboots.
traffic to drop for up to thirty seconds on the interfaces on the ASA FirePOWER hardware module while the module reboots.
13.
You can monitor the update's progress on the Tasks tab in the Firepower Management Center’s Message Center.
Note that managed devices may reboot twice during the update; this is expected behavior.
Caution:
If you encounter issues with the update (for example, if the Tasks tab indicates that the update has failed or if it shows no progress
for several minutes), do not restart the update. Instead, contact Support.
14.
Select Devices > Device Management and confirm that the devices you updated have the correct software version: Version 6.1.0.
15.
Verify that the appliances in your deployment are successfully communicating and that there are no issues reported by the health monitor.
16.
Redeploy policies to all managed devices.
Click the Deploy button and select all available devices, then click Deploy.
17.
If a later patch is available on the Support site, update to the latest patch as described in the Firepower System Release Notes for that version.
You must update to the latest patch to take advantage of product enhancements and security fixes.
You must update to the latest patch to take advantage of product enhancements and security fixes.
Updating ASA FirePOWER Modules Managed via ASDM
Caution:
If you want to perform a system update readiness check, you must install the Firepower System Version 6.1 Pre-Installation package
before updating to Version 6.1. For more information, see
.
Locally managed ASA FirePOWER Modules Managed via ASDM do not require Firepower Management Centers to update. For the Version 6.1.0
update, all devices reboot.
update, all devices reboot.
To update ASA FirePOWER module managed by ASDM:
1.
Update to the minimum version as described in
2.
Read these release notes and complete any pre-update tasks. For more information, see:
—
—
—
3.
Update to ASA Version 9.6.1 and ASDM Version 7.6.1 as described in the ASA/ASDM Release Notes.
4.
Download the update from the Support site:
Cisco_Network_Sensor_Upgrade-6.1.0-330.sh
Note
: Download the update directly from the Support site. If you transfer an update file by email, it may become corrupted.
5.
Deploy configuration changes. Otherwise, the eventual update may fail.
6.
Select Configuration > ASA FirePOWER Configuration > Updates.
7.
Click Upload Update.
8.
Click Choose File to navigate to and select the update.