Cisco Cisco Firepower Management Center 2000 Manual Técnico

For each Interior Gateway Protocol tested (EIGRP and OSPF), the routing protocol was
enabled on the 10.0.0.0/24 network.

●

When testing BGP, e-BGP was used and the directly connected physical interfaces were
utilized as the update source for the peerings.

●

Router A:

Router B:

Select the Access Control Policy applied to the Firepower appliance.

1.

Create an Access Control rule with an action of Trust.

2.

Under the Ports tab, select EIGRP under protocol 88.

3.

Click Add to add the port to the destination port.

4.

Save the access control rule.

5.