Cisco Cisco IOS Software Release 12.0(15)S White Paper
ABR Type 3 LSA Filtering
Supported Platforms
2
Cisco IOS Release 12.0(15)S
Related Features and Technologies
The OSPF ABR Type 3 LSA Filtering feature is an extension of the OSPF routing protocol. For more
information about configuring OSPF and configuring route summarization and filtering, refer to the
“OSPF” chapter of the Cisco IOS Release 12.0 Network Protocols Configuration Guide, Part 1 and
Cisco IOS Release 12.0 Network Protocols Command Reference, Part 1.
information about configuring OSPF and configuring route summarization and filtering, refer to the
“OSPF” chapter of the Cisco IOS Release 12.0 Network Protocols Configuration Guide, Part 1 and
Cisco IOS Release 12.0 Network Protocols Command Reference, Part 1.
Supported Platforms
The OSPF ABR Type 3 LSA Filtering feature is supported by the following platforms in Cisco IOS
Release 12.0(15)S:
Release 12.0(15)S:
•
Cisco 7200 series
•
Cisco 7500 series
•
Cisco 12000 series
Note
Support for the Cisco 10000 and 10700 was added in Cisco IOS Release 12.0(17)ST.
Supported Standards, MIBs, and RFCs
Standards
No new or modified standards are supported by this feature.
MIBs
No new or modified MIBs are supported by this feature.
To obtain lists of MIBs supported by platform and Cisco IOS release, and to download MIB modules,
go to the Cisco MIB web site on Cisco Connection Online (CCO) at
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml.
go to the Cisco MIB web site on Cisco Connection Online (CCO) at
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml.
RFCs
No new or modified standards are supported by this feature.
Configuration Tasks
See the following sections for configuration tasks for the OSPF ABR Type 3 LSA Filtering feature.
Each task in the list is identified as either optional or required:
Each task in the list is identified as either optional or required:
•
Configuring ABR Type 3 LSA Filtering (required)
•