Cisco Cisco IOS Software Release 12.0(23)S

To verify that the ATM CLP Setting feature has been enabled on the 8-Port OC-3 STM-1 ATM line card, 
perform the following steps:

To monitor and maintain the ATM CLP Setting feature, use the following commands:

This section provides examples of the use of the CLP bit setting feature by itself or in combination with 
per-VC WRED, VC bundling, or per-VC MDRR with LLQ (MDRR/LLQ).

This section provides the following configuration examples:

Router# show policy-map

Displays policy map information. Verify that the output 
list includes the newly configured set atm-clp 
command entry. 

Router# show policy-map interface atm 

slot/port[.subinterface-number]

Displays the contents of a policy map, including the 
attached interface.

Router# show atm pvc

Displays information about the ATM interfaces. 

Router# show policy-map 

Displays the contents of a policy map.

Router# show policy-map interface atm 

slot/port[.subinterface-number]

Displays the contents of a policy map, including the 
attached interface.

Router# show atm pvc

Displays general ATM PVC statistics associated with 
the PVCs on the interface.

Router# show atm pvc pvc-name

Displays in-depth ATM PVC statistics associated with 
a particular interface.