Cisco Cisco IOS Software Release 12.4(4)T
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
538
Caveats for Cisco IOS Release 12.4T
OL-8003-09 Rev. Z0
Resolved Caveats—Cisco IOS Release 12.4(20)T1
Workaround: There is no workaround.
•
CSCsw92379
Symptoms: Many “IP ARP: Sticky ARP entry invalidated” syslog messages appear, and the RP
reloads unexpectedly.
reloads unexpectedly.
Conditions: This symptom is observed when a linecard is swapped while thousands of DHCP
snooping bindings are present and the ip sticky-arp command is configured.
snooping bindings are present and the ip sticky-arp command is configured.
Workaround: Configure the no ip sticky-arp command.
•
CSCsx28297
Symptoms: While the atm pvp command is applied under the ATM interface, a router reloads.
Conditions: This symptom is observed while the atm pvp command is applied under the ATM
interface.
interface.
Workaround: There is no workaround.
Resolved Caveats—Cisco IOS Release 12.4(20)T1
Cisco IOS Release 12.4(20)T1 is a rebuild release for Cisco IOS Release 12.4(20)T. The caveats in this
section are resolved in Cisco IOS Release 12.4(20)T1 but may be open in previous Cisco IOS releases.
section are resolved in Cisco IOS Release 12.4(20)T1 but may be open in previous Cisco IOS releases.
Miscellaneous
•
CSCee21263
Symptoms: Fragmented packets might be dropped by the router.
Conditions: This is observed with non-initial fragments, when a reflexive ACL is configured on the
router and the return traffic supposed to be allowed by the reflexive ACL is fragmented.
router and the return traffic supposed to be allowed by the reflexive ACL is fragmented.
Workaround: There is no workaround. However, normal ACLs are not known to exhibit this
behavior.
behavior.
•
CSCek63963
Symptoms: Router crashes with a traceback decode showing a divide by 0 error.
Conditions: Occurs when a rate-based event is configured for a counter that has a value of 0, such
as the following scenario:
as the following scenario:
1. The customer must be using a Cisco IOS Embedded Event Manager (EEM) rate-based Interface
Event Detector (either applet or Tcl script). Rate-based means use of the “rate” keyword in the event
specification statement.
Event Detector (either applet or Tcl script). Rate-based means use of the “rate” keyword in the event
specification statement.
2. The rate calculation is attempted after the counters are cleared and before any samples have been
taken.
taken.
Workaround: There is no workaround.
•
CSCek64863
Symptoms: DHCP Relay crashes while sending a DHCP offer to the client with binding as relay
binding. (0.0.0.0).
binding. (0.0.0.0).
Conditions: