Cisco Cisco IOS Software Release 12.2

CSCdu02692

A software-forced reload because of a bus error may occur on a Cisco AS5300. 

This symptom is observed on a Cisco AS5300 that is running Cisco IOS 

Release 12.2(0.18). 

There is no workaround. 

CSCdp74458

A Cisco 7500 series may reload because of a software-forced reload.

This symptom is observed on a Cisco 7500 series that is configured with compression 

and that is running Cisco IOS Release 12.0(7.03). 

There is no workaround. 

CSCdr27911

Two Cisco multiservice access concentrators may not be able to place Voice over Frame 

Relay (VoFR) calls to each other. 

This symptom is observed on a Cisco MC3810 that is running Cisco IOS 

Release 11.3(1)MA7 and a Cisco MC3810 that is running Cisco IOS Release 12.0(7)XK1. 

There is no workaround. 

CSCdr73097

Hardware compression (SA-COMP/1) does not work as expected when it is used with 

Multilink PPP (MLP) on a router. The output of the show compress EXEC command may show 
software compression and all fields as zero. Not all data will be affected but there is no way of 
knowing if compression is occurring.

This symptom is observed on a Cisco 7200 series or a Cisco 3640. 

There is no workaround. 

CSCdr89687

For a Cisco Versatile Interface Processor 2-10 (VIP2-10), VIP2-15, VIP2-20, or VIP2-40, revisions 
73-1684-01, 73-1684-02, and 73-1684-03 have ROMMONs that cannot boot large Cisco IOS 
images. VIP2-50s and the previously mentioned VIPs that are revision 73-1684-04 or a later revision 
have a ROMMON that can boot larger Cisco IOS images. VIP4s are not affected. You can use the 
show controller cbus command to see which version of ROMMON is on your card. The 
17-2674-0X parts contain VIP software ROMMON version 17.0 which fails. The 17-4327-01 parts 
contain VIP software ROMMON version 115.0, which works. There is no workaround.

CSCdr95072

A Cisco AS5300 may reload with a bus error.

This symptom is observed on a Cisco AS5300 that is running Cisco IOS 

Release 12.1(3.1).

There is no workaround. 

CSCds06280

Voice over ATM does not carry the “called_oct3” and the “calling_oct3” fields in the 

setup message.