Cisco Cisco IOS Software Release 12.2(27)SBC
Multiclass Multilink PPP
Additional References
10
Multiclass Multilink PPP
Disabling MultiClass Multilink PPP: Example
The following example shows how to completely disable multiclass multilink PPP, rejecting the option
and declining to allow the peer to transmit multiple classes:
and declining to allow the peer to transmit multiple classes:
Router(config)# interface multilink 9
Router(config-if)# ip address 10.0.0.161 255.255.255.240
Router(config-if)# ppp multilink
Router(config-if)# ppp multilink interleave
Router(config-if)# ppp multilink fragment delay 20
Router(config-if)# ppp multilink multiclass local forbid
Router(config-if)# ppp multilink multiclass remote reject
Router(config-if)# no cdp enable
Additional References
The following sections provide references related to the multiclass multilink PPP feature.
Related Documents
Standards
MIBs
Related Topic
Document Title
Provisioning Qos
Configuring Multilink PPP Connections
Cisco 10000 Series Router Broadband Aggregation, Leased-Line, and
MPLS Configuration Guide
MPLS Configuration Guide
Configuring Cisco 10000 series router line cards
Standard
Title
No new or modified standards are supported by this
feature, and support for existing standards has not been
modified by this feature.
feature, and support for existing standards has not been
modified by this feature.
—
MIB
MIBs Link
No new or modified MIBs are supported by this
feature, and support for existing MIBs has not been
modified by this feature.
feature, and support for existing MIBs has not been
modified by this feature.
To locate and download MIBs for selected platforms, Cisco IOS
releases, and feature sets, use Cisco MIB Locator found at the
following URL:
releases, and feature sets, use Cisco MIB Locator found at the
following URL: