Cisco Cisco IOS XE 3.5E Manual Técnico
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
!
ip dhcp pool vlan20
network 20.20.20.0 255.255.255.0
default-router 20.20.20.1
interface Vlan20
ip address 20.20.20.1 255.255.255.0
interface TenGigabitEthernet1/0/1
switchport trunk native vlan 12
switchport mode trunk
ip dhcp relay information trusted
ip dhcp snooping trust
wlan wpa2psk 1 wpa2psk
client vlan 20
no security wpa akm dot1x
security wpa akm psk set-key ascii 0 Cisco123
no shutdown
Note
: If your configuration contains a space in the PSK password, then use the format "password PSK". The
same format should be used if you configure with the GUI also.
Example
security wpa akm psk set-key ascii 0 "Cisco 123"
WPA2-PSK Configuration with GUI
Complete these steps in order to configure a WPA2 PSK in the WLC GUI:
Navigate to Configuration > Wireless > WLAN > WLANs, and create a new WLAN:
1.
Enable WPA2, and map it to the desired interface:
2.