Intel W3580 AT80601002274AB Manual Do Utilizador
Códigos do produto
AT80601002274AB
Electrical Specifications
22
Intel® Xeon® Processor 3500 Series Datasheet Volume 1
.
Notes:
1.
For functional operation, all processor electrical, signal quality, mechanical and thermal specifications must
be satisfied.
2.
Excessive overshoot or undershoot on any signal will likely result in permanent damage to the processor.
3.
V
TTA
and V
TTD
should be derived from the same VR.
2.11
Processor DC Specifications
The processor DC specifications in this section are defined at the processor
pads, unless noted otherwise. See
pads, unless noted otherwise. See
for the processor land listings and
for signal definitions. Voltage and current specifications are detailed in
. For platform planning, refer to
, which provides V
CC
static and transient
tolerances. This same information is presented graphically in
The DC specifications for the DDR3 signals are listed in
. Control Sideband
and Test Access Port (TAP) are listed in
.
through
list the DC specifications for the processor and are valid
only while meeting specifications for case temperature (T
CASE
as specified in
), clock frequency, and input voltages. Care should be taken to
read all notes associated with each parameter.
Table 2-6.
Processor Absolute Minimum and Maximum Ratings
Symbol
Parameter
Min
Max
Unit
Notes
1, 2
V
CC
Processor Core voltage with respect to V
SS
-0.3
1.55
V
V
TTA
Voltage for the analog portion of the integrated
memory controller, Intel QPI link and Shared
Cache with respect to V
SS
—
1.35
V
3
V
TTD
Voltage for the digital portion of the integrated
memory controller, Intel QPI link and Shared
Cache with respect to V
SS
—
1.35
V
3
V
DDQ
Processor I/O supply voltage for DDR3 with
respect to V
SS
—
1.875
V
V
CCPLL
Processor PLL voltage with respect to V
SS
1.65
1.89
V
T
CASE
Processor case temperature
See
See
°C
T
STORAGE
Storage temperature
See
See
°C