Cisco Cisco Firepower 4140 Security Appliance
© 2016 Cisco | Radware. All rights reserved. This document is Cisco Public.
Page 6 of 8
The Out-of-State Protection feature in Radware DefensePro DDoS Mitigation version 8.10.01 includes the ability of
this protection to enter a grace period upon several triggers:
this protection to enter a grace period upon several triggers:
After device startup or reboot.
After Update Polices has occurred.
After the Session table exits the full state, for a configurable time length, during which the
enforcement of state is not performed.
enforcement of state is not performed.
UDP Fragmentation Flood in Behavioral DoS Protection
This release enables the configuration and use of a new type of BDoS Protection profile: UDP Fragmentation
Flood.
Flood.
Bypass Support for Jumbo Frames
This version introduces a configuration option allowing users to select whether jumbo frames received by the
device are dropped or forwarded.
device are dropped or forwarded.
Diagnostics Packet Capture
Radware DefensePro DDoS Mitigation version 8.10.01 adds the capability to perform packet capture of data traffic,
for diagnostic purposes. The capture files are stored on the device, can be downloaded using APSolute Vision, and
can be inspected using a third-party network-protocol analyzer, such as Wireshark.
for diagnostic purposes. The capture files are stored on the device, can be downloaded using APSolute Vision, and
can be inspected using a third-party network-protocol analyzer, such as Wireshark.
Support for TLS v1.2 on the Management Interface
TLS v1.2 is now supported when using HTTPS on the management interface.
Removed Default Device Password
This release introduces a change of behavior regarding the default username and password used for the Radware
DefensePro DDoS Mitigation device. Previous versions allow the use of the default local-user credentials
radware/radware. Starting with version 8.10.01, new deployments do not accept the default password radware. The
user is required to configure a password during the initial Startup Configuration process.
DefensePro DDoS Mitigation device. Previous versions allow the use of the default local-user credentials
radware/radware. Starting with version 8.10.01, new deployments do not accept the default password radware. The
user is required to configure a password during the initial Startup Configuration process.