Cisco Cisco 2000 Series Wireless LAN Controller Manual Técnico

Introduction
 Prerequisites
      Requirements
      Components Used
      Conventions
 Dynamic VLAN Assignment with a RADIUS Server
 Configure
      Network Diagram
      Assumptions
 Configuration Steps
 Configure the RADIUS Server
      Configure Network Resources
      Configure Users
      Define Policy Elements
      Apply Access Policies
 Configure the WLC
      Configure the WLC with the Details of the Authentication Server

Configure the Dynamic Interfaces (VLANs)
Configure the WLANs (SSID)
Configure the Wireless Client Utility
 Verify
      Verify Student−1
      Verify Teacher−1
 Troubleshoot
      Troubleshooting Commands
 Related Information

This document introduces the concept of dynamic VLAN assignment. It also describes how to configure the
wireless LAN controller (WLC) and a RADIUS server − Access Control Server (ACS) that runs version 5.2 −
in order to assign wireless LAN (WLAN) clients to a specific VLAN dynamically.

Make sure that you meet these requirements before you attempt this configuration:

Have a basic knowledge of the WLC and Lightweight Access Points (LAPs)

• 

Have a functional knowledge of the AAA server

• 

Have a thorough knowledge of wireless networks and wireless security issues

•