Cisco Cisco 2000 Series Wireless LAN Controller White Paper
The Rogue APs page lists all the APs that are detected as rogue APs on the network.
From this list of rogue APs, locate the AP that you want to configured as trusted AP that falls under
category 1 (as explained in the previous section).
From this list of rogue APs, locate the AP that you want to configured as trusted AP that falls under
category 1 (as explained in the previous section).
You can locate the APs with the MAC addresses listed on Rogue APs page. If the desired AP is not in
this page, click Next in order to identify the AP from the next page.
this page, click Next in order to identify the AP from the next page.
4.
Once the desired AP is located from the Rogue AP list, click the Edit button that corresponds to the
AP, which takes you to the detail page of the AP.
AP, which takes you to the detail page of the AP.
In the Rogue AP details page, you can find detailed information about this AP (such as whether that
AP connected to wired network, as well as the current status of the AP and so on).
AP connected to wired network, as well as the current status of the AP and so on).
5.
In order to configure this AP as a trusted AP, select Known Internal from the Update Status
drop−down list, and click Apply.
drop−down list, and click Apply.
When you update the AP status to Known Internal, this AP is configured as the trusted AP of this
network.
network.
6.