Cisco Cisco Flex 7510 Wireless Controller Guia De Resolução De Problemas
Do not enable the WLAN at this point. This example is for Pod1:
3.
Make sure the WLAN is configured for Central Switched mode under the Advanced tab and make
sure Local Switching is not checked. Or, configure Local Switched mode.
sure Local Switching is not checked. Or, configure Local Switched mode.
4.
Configure or verify that all Rate Limiting parameters are set to à for both per−user and per−SSID
on the WLAN "bdrl−pod1". QoS is set to Gold, Platinum, Silver or Bronze. In this example, it is set
to Silver.
on the WLAN "bdrl−pod1". QoS is set to Gold, Platinum, Silver or Bronze. In this example, it is set
to Silver.
5.