Cisco Cisco 2000 Series Wireless LAN Controller Manual Técnico

Copy the public key−hash from the debug pm pki enable command output and use it to replace the
public key−hash in the authentication list.

1. 

Issue the config auth−list add ssc AP_MAC AP_key command in order to add the AP MAC address
and key−hash to the authorization list:

This is an example of this command:

(Cisco Controller)>config auth−list add ssc 00:0e:84:32:04:f0

2. 

There is a certificate or public key corruption on the AP.

Complete this step:

Issue the debug lwapp errors enable and debug pm pki enable commands.

You see messages that indicate the certificates or keys that are corrupted.

Use one of these two options in order to resolve the problem:

MIC APRequest a return materials authorization (RMA).

• 

SSC APDowngrade to Cisco IOS Software Release 12.3(7)JA.

Complete these steps in order to downgrade:

• 

Use the reset button option.

1. 

Clear the controller settings.

2. 

Run the upgrade again.

3. 

The controller might be working in Layer 2 mode.

Complete this step:

Check the mode of operation of the controller.

Converted APs only support Layer 3 discovery. Converted APs do not support Layer 2 discovery.

Complete these steps: