Cisco Cisco 2106 Wireless LAN Controller

show ap cdp ap-name Cisco_AP

show ap cdp neighbors ap-name Cisco_AP

You can now disable Secure Socket Layer (SSL)v2 for web administration and web authentication. 
When SSLv2 is disabled, users cannot connect using a browser configured with SSLv2 only. They 
must use a browser that is configured to use a more secure protocol such as SSLv3 or later. The new 
CLI command to enable or disable SSLv2 is config network secureweb cipher-option sslv2 
{enable | disable}. The default value is enabled.

To help troubleshoot controller crashes, you can now configure the controller to automatically 
upload its core dump file to an FTP server after experiencing a crash using these CLI commands:

config coredump {enable | disable}

config coredump ftp server_ip_address filename

config coredump username ftp_username password ftp_password

You can now upload the console dump resulting from a software-watchdog-initiated reboot of the 
controller following a crash using the transfer upload datatype watchdog-crash-file controller 
CLI command. The software watchdog module periodically checks the integrity of the internal 
software and makes sure that the system does not stay in an inconsistent or non-operational state for 
a long period of time.

You can upload the kernel panic information if a kernel panic occurs using the transfer upload 
datatype panic-crash-file controller CLI command.

To help troubleshoot hard-to-solve or hard-to-reproduce memory problems, you can configure the 
controller to monitor for memory leaks and to perform an auto-leak analysis between two memory 
thresholds. Refer to the “Monitoring Memory Leaks” section of the Cisco Wireless LAN Controller 
Configuration Guide, Release 5.2 for information on these commands.

The following CLI commands have been removed:

config location 802.11b monitor enable Cisco_AP channel1 channel2 channel3 channel4

config location 802.11b monitor disable Cisco_AP

This section contains important information to keep in mind when installing controllers and access 
points.