Cisco Cisco 2106 Wireless LAN Controller

RRM pages—The RRM menu options have been divided among five new controller GUI pages to 
improve usability.

Cisco Aironet 1000 Series Access Points—The 1000 series access points are not supported for use 
with controller software release 5.0.148.0 or later.

Global credentials—In controller software releases prior to 5.0.148.0, you can set the access point 
enable password only for access points that are currently connected to the controller. In controller 
software release 5.0.148.0, you can set a global username, password, and enable password that all 
access points inherit as they join the controller. This includes all access points that are currently 
joined to the controller and any that join in the future. Also in controller software release 5.0.148.0, 
after an access point joins the controller, the access point enables console port security, and you are 
prompted for your username and password whenever you log into the access point’s console port. 
When you log in, you are in non-privileged mode, and you must enter the enable password in order 
to use the privileged mode.

The global credentials feature in controller software release 5.0.148.0 is supported on all 
access points that have been converted to lightweight mode, except the 1100 series. 
VxWorks access points are not supported.

The following command is no longer valid: config ap username user_id password passwd 
{all | ap_name}.

Japan update—The Japanese government is formally permitting wireless LAN use of the 
frequencies in the W56 band for 802.11a radios. The W56 band includes the following channels, 
frequencies, and power levels (in dBm):

100

5500

17

15

104

5520

17

15

108

5540

17

15

112

5560

17

15

116

5580

17

15

120

5600

17

15

124

5620

17

15

128

5640

17

15

132

5660

17

15