Cisco Cisco 2106 Wireless LAN Controller
4
Release Notes for Cisco Wireless LAN Controllers and Lightweight Access Points for Release 6.0.196.0
OL-31336-01
Software Release Information
Software Release Information
Software is factory installed on your controller and automatically downloaded to the access points after
a release upgrade and whenever an access point joins a controller. As new releases become available for
the controllers and their access points, consider upgrading.
a release upgrade and whenever an access point joins a controller. As new releases become available for
the controllers and their access points, consider upgrading.
Note
The Cisco WiSM requires software release SWISMK9-32 or later. The Supervisor 720 12.2(18)SXF2
supports the Cisco WiSM software release 3.2.78.4 or later, and the Supervisor 720 12.2(18)SXF5
(Cisco IOS Software Modularity) supports the Cisco WiSM software release 4.0.155.5 (with Cisco IOS
Software Modularity).
supports the Cisco WiSM software release 3.2.78.4 or later, and the Supervisor 720 12.2(18)SXF5
(Cisco IOS Software Modularity) supports the Cisco WiSM software release 4.0.155.5 (with Cisco IOS
Software Modularity).
Note
To use the Cisco WiSM in the Cisco 7609 and 7613 Series Routers, the routers must be running Cisco
IOS Release 12.2(18)SXF5 or later.
IOS Release 12.2(18)SXF5 or later.
Note
The Cisco Wireless LAN Controller Network Module is supported on Cisco 28/37/38xx Series
Integrated Services Routers running Cisco IOS Release 12.4(11)T2, 12.4(11)T3, and 12.5.
Integrated Services Routers running Cisco IOS Release 12.4(11)T2, 12.4(11)T3, and 12.5.
Note
To use the controller in the Catalyst 3750G Wireless LAN Controller Switch, the switch must be running
Cisco IOS Release 12.2(25)FZ, 12.2(35)SE or later, 12.2(37)SE or later, 12.2(44)SE or later, or
12.2(46)SE or later. The following Cisco IOS Releases and any variants are not supported: 12.2(25)SEC,
12.2(25)SED, 12.2(25)SEE, 12.2(25)SEF, and 12.2(25)SEG. All Catalyst 3750 software feature sets (IP
Base, IP Service, and Advanced IP Services) are supported for use with the controller.
Cisco IOS Release 12.2(25)FZ, 12.2(35)SE or later, 12.2(37)SE or later, 12.2(44)SE or later, or
12.2(46)SE or later. The following Cisco IOS Releases and any variants are not supported: 12.2(25)SEC,
12.2(25)SED, 12.2(25)SEE, 12.2(25)SEF, and 12.2(25)SEG. All Catalyst 3750 software feature sets (IP
Base, IP Service, and Advanced IP Services) are supported for use with the controller.
Note
You can use the 2112 and 2125 controllers only with software release 5.1.151.0 or later.
Finding the Software Release
To find the software release running on your controller, click Monitor and look at the Software Version
field under Controller Summary on the controller GUI or enter show sysinfo on the controller CLI.
field under Controller Summary on the controller GUI or enter show sysinfo on the controller CLI.
Special Rules for Upgrading to Controller Software Release 6.0.196.0
Caution
Before upgrading your controller to software release 6.0.196.0, you must comply with the following
rules.
rules.
•
Before you download a software image or an ER.aes file to a 2100 series controller or a controller
network module, use the show memory statistics CLI command to see the current amount of free
memory. If the controller has less than 90 MB of free memory, you need to reboot it before
downloading the file.
network module, use the show memory statistics CLI command to see the current amount of free
memory. If the controller has less than 90 MB of free memory, you need to reboot it before
downloading the file.