Cisco Cisco 4100 Series Wireless LAN Controller Referências técnicas
5/26/05
config ap static-ip
OL-7427-02
config ap static-ip
config ap static-ip
To configure an Cisco 1000 Series lightweight access point static IP address configuration, use the
config ap static-ip command.
config ap static-ip command.
>config ap static-ip [enable/disable <Cisco AP name> <IP addr> <IP mask>
<gateway>
Syntax
config
Configure parameters.
ap
Cisco 1000 Series lightweight access point.
static-ip
Cisco 1000 Series lightweight access point static IP
address
address
[enable/
Configure the Cisco 1000 Series lightweight access
point static IP address
point static IP address
disable]
Disable the Cisco 1000 Series lightweight access
point static IP address. The Cisco 1000 Series light-
weight access point uses DHCP to get the IP address.
point static IP address. The Cisco 1000 Series light-
weight access point uses DHCP to get the IP address.
<Cisco AP name>
Cisco 1000 Series lightweight access point name.
<IP address>
Cisco 1000 Series lightweight access point IP
address
address
<IP mask>
IP Mask
<gateway>
Gateway
Defaults
(none)
Examples
>config ap static-ip enable AP2 1.1.1.1 255.255.255.0 10.1.1.1
Related Commands
show sysinfo, config sysname, config ap secondary-base, config ap
primary-base
primary-base