Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Cisco
  4. Cisco 4100 Series Wireless LAN Controller
  5. Referências técnicas

Cisco Cisco 4100 Series Wireless LAN Controller Referências técnicas

Download
Página de 190
3/22/05
config network otap-mode
 
OL-7427-01 Rev 1
Related Commands
show network
config network otap-mode
config network otap-mode
To enable or disable over-the-air provisioning (OTAP) of Cisco 1000 Series lightweight access points, 
use the config network otap-mode command.
>config network otap-mode [enable/disable]
Syntax
config
Configure parameters.
network
Network parameters.
otap-mode
Over-the-air Cisco 1000 Series lightweight access 
point provisioning.
[enable/disable]
Change the OTAP state.
Defaults
Enabled.
Examples
>config network otap-mode disable
Related Commands
show network
config network peer-blocking
config network peer-blocking
Disabled allows same-subnet clients to communicate through the Cisco Wireless LAN Controller. 
Enabled (default) forces same-subnet clients to communicate through a higher-level router. To enable 
or disable peer blocking, use the config network peer-blocking command.
>config network peer-blocking [enable/disable]
Syntax
config
Configure parameters.
network
Network parameters.
peer-blocking
Peer communications requirement.
[enable/disable]
Change the peer-blocking state.
Defaults
Disabled.
Examples
>config network peer-blocking enable
Related Commands
show network
config network rf-mobility-domain
config network rf-mobility-domain
To set the RF Controller Mobility Group domain name, use the config network rf-mobility-domain 
command.
>config network rf-mobility-domain <domain_name>
Syntax
config
Configure parameters.
network 
Cisco Wireless LAN Controller network parameter.
rf-mobility-domain
Controller Mobility Group domain.
<domain_name>
Controller Mobility Group name, an ASCII string of 
up to 31 characters (case-sensitive).
Defaults
(none)
Examples
>config network rf-mobility-domain travelers_group
Related Commands
show network