Cisco Cisco 4100 Series Wireless LAN Controller Referências técnicas
3/22/05
config trapflags stpmode
OL-7427-01 Rev 1
>config trapflags rrm-profile <load/noise/interference/coverage> [enable/
disable]
Syntax
config
Configure parameters.
trapflags
Trap parameters.
rrm-profile
RRM profile traps flag.
<load/noise/
interference/coverage>
interference/coverage>
Profile parameters
[enable/disable]
Modify the state of the parameter.
Defaults
Enabled
Examples
>config trapflags rrm-profile load disable
Related Commands
show trapflags
config trapflags stpmode
config trapflags stpmode
To enable or disable sending spanning tree traps, use the config trapflags stpmode command.
>config trapflags stpmode [enable/disable]
Syntax
config
Configure parameters.
trapflags
Trap parameters.
stpmode
Spanning traps flag.
[enable/disable]
Modify the state of the parameter.
Defaults
Enabled
Examples
>config trapflags stpmode disable
Related Commands
show trapflags
config trapflags wps
config trapflags wps
To enable or disable sending wireless protection system (WPS) traps, use the config trapflags wps
command.
command.
>config trapflags wps [enable/disable]
Syntax
config
Configure parameters.
trapflags
Trap parameters.
wps
Wireless Protection System traps.
[enable/disable]
Modify the state of the parameter.
Defaults
Enabled
Examples
>config trapflags wps disable
Related Commands
show trapflags
CONFIG WATCHLIST COMMANDS
config watchlist
Use the following config watchlist commands.
•
•